1.5 release

installer/ZZ9000Installer/Devs/Networks/ZZ9000Net.device

@@ -1 +0,0 @@
-../../../../net/ZZ9000Net.device

installer/ZZ9000Installer/Install ZZ9000

@@ -85,6 +85,18 @@
 
 (complete 50)
 
+(if (askbool (prompt "Do you want to install the USB Storage driver for ZZ9000? Warning: It is still in beta. Don't use it to store important data!") (help ""))
+(
+(copyfiles 
+   (prompt "Install ZZ9000USBStorage.device")
+   (help "This will install the disk driver for ZZ9000's USB mass storage functionality.")
+   (source "Devs/ZZ9000USBStorage.device")
+   (dest "Devs:")
+   (confirm))
+))
+
+(complete 60)
+
 (if (askbool (prompt "Do you want to install the SANA-II Ethernet driver for ZZ9000? This requires an existing Installation of RoadShow, MiamiDX or similar.") (help ""))
 
 (

installer/ZZ9000Installer/Libs/Picasso96/ZZ9000.card

@@ -1 +0,0 @@
-../../../../rtg/ZZ9000.card

net/Common.mk

@@ -44,7 +44,7 @@ LINK = vlink -bamigahunk -x -s -mrel -Cvbcc -Bstatic -nostdlib #-Rshort
 #LINKEXE = vlink -bamigahunk -x -s -mrel -Cvbcc -Bstatic
 LINKEXE = vc +aos68k
 #LINK = $(CCX) -nostdlib
-CFLAGS  = -Os -+ -sc -c99 -cpu=$(CPU)
+CFLAGS  = -O2 -+ -sc -c99 -cpu=$(CPU)
 CFLAGS2 = -Os -+ -sc -c99 -cpu=$(CPU2)
 
 else

net/Makefile

@@ -34,7 +34,7 @@ DEVICEDATE=31.07.2019
 DEVICEID=ZZ9000Net.device
 DEFINES = #
 ASMDEFS = #
-CPU = 68020
+CPU = 68000
 
 DEVICEID2= #test.device_68000
 DEFINES2 = # -DPROTO_V2EXPNET

rtg/build.sh

@@ -2,3 +2,4 @@ export VBCC=../../vbcc
 export PATH=$PATH:$VBCC/bin
 
 vc +aos68k -nostdlib -I$VBCC/targets/m68k-amigaos/include2 -c99 -O2 -o ZZ9000.card mntgfx.c -ldebug -lamiga
+

rtg/mntgfx.c

@@ -37,7 +37,7 @@ static ULONG LibStart(void) {
 }
 
 static const char LibraryName[] = "ZZ9000.card";
-static const char LibraryID[]   = "$VER: ZZ9000.card 1.4 (2019-09-26)\r\n";
+static const char LibraryID[]   = "$VER: ZZ9000.card 1.5 (2019-12-17)\r\n";
 
 __saveds struct MNTGFXBase* OpenLib( __reg("a6") struct MNTGFXBase *MNTGFXBase);
 BPTR __saveds CloseLib( __reg("a6") struct MNTGFXBase *MNTGFXBase);
@@ -221,8 +221,8 @@ int FindCard(__reg("a0") struct RTGBoard* b) {
     KPrintF("ZZ9000.card: FW Revision Major: %ld.\n", fwrev_major);
     KPrintF("ZZ9000.card: FW Revision Minor: %ld.\n", fwrev_minor);
 
-    if (fwrev_major<=1 && fwrev_minor<3) {
-      char *alert = "\x00\x14\x14ZZ9000.card v1.4 needs at least firmware (BOOT.bin) v1.3.\x00\x00";
+    if (fwrev_major<=1 && fwrev_minor<5) {
+      char *alert = "\x00\x14\x14ZZ9000.card v1.5 needs at least firmware (BOOT.bin) v1.5.\x00\x00";
       DisplayAlert(RECOVERY_ALERT, alert, 52);
       return 0;
     }
@@ -469,6 +469,8 @@ void init_modeline(MNTZZ9KRegs* registers, uint16 w, uint16 h, uint8 colormode,
     mode = 5;
   } else if (w==720 && h==576) {
     mode = 6;
+  } else if (w==640 && h==512) {
+    mode = 9;
   }
 
   zzwrite16(&registers->mode, mode|(colormode<<8)|(scalemode<<12));