|mntmn 7351f1f4f1||vor 11 Monaten|
|cmsis||vor 1 Jahr|
|doc||vor 1 Jahr|
|src||vor 11 Monaten|
|tools||vor 1 Jahr|
|.gitignore||vor 1 Jahr|
|CW_LPC11U24.hzp||vor 1 Jahr|
|License.txt||vor 1 Jahr|
|Makefile||vor 1 Jahr|
|README.md||vor 1 Jahr|
|changelog.md||vor 1 Jahr|
|flash.sh||vor 1 Jahr|
This code base is an attempt at providing a reasonably well-organized, open-source starting point for projects based on the LPC11Uxx and LPC13Uxx family of MCUs.
It includes the following key features, which can be easily enabled or disabled via a single board-specific config file:
This code base is designed to work transparently with the following MCUs, allowing you to select the MCU with the right price/performance/size ratio for your project without having to rewrite any underlying code:
In an attempt to make the code base relevant in a variety of situations, there is a basic board abstraction layer, and all config settings are board-specific.
The target board in indicated in the shared projectconfig.h file, which in turn references the board-specific config and initialization code in the ‘boards/' subfolder.
The code base contains a few dependencies on GCC extensions (notably in the localisation system), and has not been tested with any non-GCC toolchain.
At the moment the following IDEs are supported by the code base, and this list may be extended in the future:
The codebase includes startup code, linker scripts and a makefile to build this codebase with the cross-platform, open-source GNU/GCC toolset. This gives you the most control over how your project is built, and allows you to build your project on any platform with support for GCC and make (*NIX, Mac OSX, Windows, etc.). (more)
LPCXpresso / Code Red IDE (.cproject/.project)
LPCXpresso is a free of charge Eclipse-based IDE based around GCC. It’s based on Code Red’s commercial Red Suite IDE, but is provided free of charge by NXP Semiconductors with a debug limit up to 128Kb (you can, however, compile projects larger than this), which is within the limits of all of the chips supported by this code base.
Inexpensive LPCXpresso development boards are available with integrated SWD debuggers that can be seperated from the MCU part of the board and used to debug any supported MCU or device. (more)
Crossworks for ARM (CW_*.hzp)
Project files are also provided for Rowley Associate’s popular Crossworks for ARM IDE, which is GCC based, includes an optimised standard C library, and supports a large variety of HW debuggers (including the popular J-Link from Segger). (more)
This code base is still in active development, and there are almost certainly a number of improvements that can be made to it, bugs that will need to be worked out, and pieces of code that could be better organized or rewritten entirely.
The current localisation system is quite unsatisfactory, for example, but the decision was made to keep in in the code base in the hopes that other people will propose improvements to it, as well as to other parts of this code base.
Until an initial public release is made (version 1.0), the code base should be considered unstable and some reorganisation will almost certainly continue to take place in different parts of the code.
The current code has a good overall structure, but there are still many parts that can be streamlined or reorganized (for example, reworking the UART buffer to use src/core/fifo.c instead of the older buffer from a previous code base).
Quite a bit of time, effort and money has gone into producing this open source code base in the sole hope that it will make things easier for other people to get started with this well-rounded MCU family. If you find the code base useful as is, the best thanks you can give is to contribute something useful back to it, and improve the current code base so that other people can learn from your efforts as well.
Where possible, all code is provided under a BSD style license, but each file is individually licensed and you should ensure that you fully understand the license terms and limitations of any files you use in your project.