Commit Graph

  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • 1a87b94020 (HEAD -> master) makefile.lib: fix surplus backslash by Lukas F. Hartmann 2020-11-30 22:35:19 +0100
  • 11f523f4b1 fix dtc-lexer yyloc redefinition by Lukas F. Hartmann 2020-11-30 22:35:01 +0100
  • 35759407b3 (tag: 2020-06-01) MNT Reform: board: fix indentation, reset USB hub, console on tty1 by mntmn 2020-05-31 19:04:01 +0200
  • 7d4327e993 WIP: MNT Reform: hack to set default env vars to boot from mmc by mntmn 2020-05-31 01:42:52 +0200
  • 6ea506ae14 dts: activate second usdhc controller to be able to load from SD card by mntmn 2020-05-28 19:46:53 +0200
  • 4e3c76d868 build.sh: use max procs to build by mntmn 2020-05-28 15:32:06 +0200
  • 87b132e653 imximage: enable hdmi blob by mntmn 2020-05-28 15:31:39 +0200
  • 4b6b6b1eea reform2: add hdmi blob by mntmn 2020-05-21 16:58:02 +0200
  • abdb1d4349 reform2: add lpddr4 training binaries by mntmn 2020-05-21 16:57:45 +0200
  • dfded62ee7 reform2: add config file by mntmn 2020-05-21 16:51:02 +0200
  • fd95e03d8d reform2: WIP build and flash scripts by mntmn 2020-05-21 16:40:15 +0200
  • b3a8287b13 reform2: WIP tweaks to nitrogen8m_som.h by mntmn 2020-05-21 16:39:23 +0200
  • 4b9d8552b7 reform2: hack to force sd/emmc to 4 bits and non-removable by mntmn 2020-05-21 16:37:42 +0200
  • 3291375546 reform2: WIP some comments for lpddr4_init by mntmn 2020-05-21 16:35:24 +0200
  • 79ef7eefe4 reform2: dump clocks and test some DDR bytes in SPL by mntmn 2020-05-21 16:34:04 +0200
  • aa51149ba9 reform2: remove some unneeded features from nitrogen8m_som.c by mntmn 2020-05-21 16:30:47 +0200
  • b5750e89af reform2: sd/mmc: force enable all controllers by mntmn 2020-05-21 16:25:57 +0200
  • 7e83e972a4 son: spl change soc voltage to .9V by Troy Kisky 2019-12-05 14:12:30 -0800
  • 4748acafb5 son: set VDD_VPU_GPU to .9 by Troy Kisky 2019-12-04 15:33:00 -0800
  • f71ea992d4 squash Makefile: test for CONFIG_IMX8MN by Troy Kisky 2019-12-04 10:56:33 -0800
  • 6332e1ed54 imx8m: imx8mq: soc: fix get chip rev for B1 revision" by Troy Kisky 2019-12-03 16:37:21 -0800
  • 61986c013a boundary: common: mx6: 800mhz_256mx16: increase tRFC by Troy Kisky 2019-11-25 14:07:19 -0800
  • 5e63b20ab8 son: initial addition, Boundary Devices board by Troy Kisky 2019-11-21 09:53:51 -0800
  • c20449e5f4 fbpanel: add jeida/spwg/split-mode support to mipi panels by Troy Kisky 2019-11-21 12:06:19 -0800
  • b3e69f41a2 nitrogen8mm: spl: combine pads into 1 array by Troy Kisky 2019-11-21 09:50:20 -0800
  • 8f257b301e nitrogen8m: fix unused GPIRQ_ENET_PHY definition by Troy Kisky 2019-11-21 09:49:00 -0800
  • 0d43ae8659 fbpanel: increase hsync_len for panel LTK080A60A004T by Troy Kisky 2019-11-22 16:51:34 -0800
  • b687661f06 fbpanel: increase hsync_len for panel M101NWWB by Troy Kisky 2019-11-22 16:41:14 -0800
  • 0bd5847cea arch-imx8m: imx-regs-imx8mq: add GPR_TZASC_SWAP_ID by Troy Kisky 2019-11-19 16:17:31 -0800
  • 8ffffc619d nitrogen8mm: add rev 2 by Troy Kisky 2019-11-19 14:00:06 -0800
  • 1e10b96c81 nitrogen8mm: add TARGET_NITROGEN8MN by Troy Kisky 2019-11-13 10:03:40 -0800
  • 70e84d952c hl8mm: initial addition, Boundary Devices board by Troy Kisky 2019-11-19 11:30:44 -0800
  • 5f2dad04f4 boundary: bootscripts: add 8MMQ/8MNano by Troy Kisky 2019-11-19 11:24:28 -0800
  • e79df699f9 fbpanel: add VD_MIPI_TM070JDHG30 by Troy Kisky 2019-11-19 10:33:11 -0800
  • 97ab4bd9dd imx: add i.MX8MN DDR4 board support by Peng Fan 2019-09-16 03:09:55 +0000
  • 4bc2b575d3 clock_imx8mm: grab init_uart_clk from mainline by Troy Kisky 2019-11-12 15:53:47 -0800
  • de3420aa26 sysreset: enable driver support in SPL/TPL by Kever Yang 2019-04-02 20:41:25 +0800
  • f05c37e1f9 Makefile: test for CONFIG_IMX8MN by Troy Kisky 2019-11-12 13:24:25 -0800
  • a7c06e8330 drivers: ddr: introduce DDR driver for i.MX8M by Peng Fan 2018-11-20 10:19:57 +0000
  • f8cb4a7d79 imx: add dtsi for i.MX8MN by Peng Fan 2019-09-16 03:09:52 +0000
  • bbdcc113e2 imx8m: restrict reset_cpu by Peng Fan 2019-08-27 06:25:41 +0000
  • 9608382083 imx8m: add i.MX8MN ddr4 image cfg file by Peng Fan 2019-09-16 03:09:50 +0000
  • 48bcfc2d6a protect LCDIF_PIXEL_CLK_ROOT by Troy Kisky 2019-11-12 11:04:30 -0800
  • 04f09c9b44 imx8m: imx-regs: add IMX8MN support by Troy Kisky 2019-11-11 17:20:02 -0800
  • 47af0c2ebc tools: imx8m_image: test for ddr4 vs lpddr4 by Troy Kisky 2019-11-13 12:01:35 -0800
  • c874b22ce8 tools: imx8m_image: support ddr4 firmware by Peng Fan 2019-09-16 03:09:44 +0000
  • 1277d11daf pinctrl: imx8m: support i.MX8MN by Peng Fan 2019-09-16 03:09:42 +0000
  • 3009df457a tools: imx8mimage: add ROM VERSION by Peng Fan 2019-09-16 03:09:39 +0000
  • 4fdf099d83 imx8mn: add get_boot_device by Peng Fan 2019-09-16 03:09:36 +0000
  • 30a4b90ad1 imx: cpu: restrict get_boot_device by Peng Fan 2019-09-16 03:09:34 +0000
  • fe5c1edf75 imx: add rom api support by Peng Fan 2019-09-16 03:09:31 +0000
  • 7026d0a987 imx8mn: add pin header by Peng Fan 2019-09-16 03:09:26 +0000
  • bf255d7d6d imx: add i.MX8MN PE property by Peng Fan 2019-09-16 03:09:23 +0000
  • 3af24536bf imx8mn: set BYPASS ID SWAP to avoid AXI bus errors by Peng Fan 2019-09-16 03:09:20 +0000
  • 42ebaf7051 imx8m: add clk support for i.MX8MN by Peng Fan 2019-09-16 03:09:17 +0000
  • 1d0ff50dbd imx8mn: support get_cpu_rev by Peng Fan 2019-06-27 17:23:49 +0800
  • 308ca269d0 imx8m: imx8mq: get chip rev for B1 revision by Peng Fan 2019-10-16 10:24:17 +0000
  • 5c7054b80e imx: cpu: add CHIP_REV_2_1 macro by Peng Fan 2018-11-20 10:19:18 +0000
  • 0fe89cbbcb imx: add get_cpu_rev support for i.MX8MM by Peng Fan 2019-08-27 06:25:17 +0000
  • 8e680f2554 imx: i.MX8MQ: clear ocotp error bit by Peng Fan 2019-04-17 09:41:16 +0000
  • b9471858db imx: add i.MX8MM cpu type by Peng Fan 2019-08-27 06:25:04 +0000
  • 923f79f83c imx: add i.MX6ULZ cpu type by Peng Fan 2019-08-08 09:55:52 +0000
  • 68b54f2925 imx: cpu.c: give access to reset cause in spl by Max Krummenacher 2019-02-01 16:04:51 +0100
  • fc28a31ea5 imx: add i.MX8MN kconfig entry by Peng Fan 2019-09-16 03:09:12 +0000
  • e4826723cd nitrogen8mm_som: prepare for i.MX8MN support by Troy Kisky 2019-11-13 11:00:42 -0800
  • d21b2f8c0f nitrogen8mm: prepare for i.MX8MN support by Troy Kisky 2019-11-13 09:52:46 -0800
  • 052df6b435 moo: prepare for i.MX8MN support by Troy Kisky 2019-11-13 10:49:03 -0800
  • d167e555e2 boundary: common: use IOMUX_PAD_CTRL for i.MX8MM/i.MX8MN with updated pad names(__) by Troy Kisky 2019-11-13 09:41:41 -0800
  • e88a50aabd arch-imx8m: imx8mm_pins: make names like imx8mn_pins by Troy Kisky 2019-11-13 09:37:13 -0800
  • a7b9f08b0c usb: host: Kconfig: add depends on IMX8MN for config USB_EHCI_MX7 by Troy Kisky 2019-11-13 10:02:36 -0800
  • 3e9c69748b fbpanel: add CONFIG_IMX8MN checks by Troy Kisky 2019-11-13 09:39:47 -0800
  • 55f83b75ac iomux-v3: add IOMUX_PAD_CTRL for i.MX8MM/i.MX8MN by Troy Kisky 2019-11-13 09:38:41 -0800
  • 7b0dc76e94 nitrogen8mm_som: move CONFIG_SPL_TEXT_BASE out of CONFIG_SYS_EXTRA_OPTIONS by Troy Kisky 2019-11-13 10:01:12 -0800
  • 4d69107062 nitrogen8mm: move CONFIG_SPL_TEXT_BASE out of CONFIG_SYS_EXTRA_OPTIONS by Troy Kisky 2019-11-13 09:59:50 -0800
  • f3ae3dcc88 nitrogen8m_som: move CONFIG_SPL_TEXT_BASE to defconfig by Troy Kisky 2019-11-13 09:57:33 -0800
  • edeb624007 nitrogen8m: move CONFIG_SPL_TEXT_BASE to defconfig by Troy Kisky 2019-11-13 09:56:10 -0800
  • b7450610b6 moo: move CONFIG_SPL_TEXT_BASE out of CONFIG_SYS_EXTRA_OPTIONS by Troy Kisky 2019-11-13 09:54:01 -0800
  • 831ccf0e15 bio: move CONFIG_SPL_TEXT_BASE to defconfig by Troy Kisky 2019-11-13 09:51:39 -0800
  • f84a23ca5e configs: move CONFIG_SPL_TEXT_BASE to Kconfig by Simon Goldschmidt 2018-09-30 14:31:53 +0200
  • b74cabad62 nitrogen6_max: calibrate nitrogen6_max_4gr0.cfg by Troy Kisky 2019-11-06 11:48:59 -0800
  • 2fdf190c0c nitrogen8m_som: add CONFIG_MMC_HS200_SUPPORT by Troy Kisky 2019-11-04 14:12:37 -0800
  • e8f7897f61 nitrogen8m: add CONFIG_MMC_HS200_SUPPORT by Troy Kisky 2019-11-04 14:11:20 -0800
  • 62cf96ec91 bio: add CONFIG_MMC_HS200_SUPPORT by Troy Kisky 2019-11-04 14:08:50 -0800
  • f24113f5a7 dts: imx8mq-nitrogen8m_som: enable hs200 for eMMC by Troy Kisky 2019-11-04 14:04:03 -0800
  • 6545b775da dts: imx8mq-nitrogen8m: enable hs200 for eMMC by Troy Kisky 2019-11-04 14:03:52 -0800
  • b1aa972a15 dts: imx8mq-bio: enable hs200 for eMMC by Troy Kisky 2019-11-04 14:03:26 -0800
  • 2d5fba927d dts: imx8mm-moo: enable UHS for sd card/ hs200 for eMMC by Troy Kisky 2019-11-04 14:02:01 -0800
  • 52df0dd7ad nitrogen8mm_som: add CONFIG_MMC_HS200_SUPPORT by Troy Kisky 2019-11-04 13:52:53 -0800
  • 00a5d8c60d nitrogen8mm: add CONFIG_MMC_HS200_SUPPORT by Troy Kisky 2019-11-04 13:46:40 -0800
  • 15f611af68 dts: imx8mm-nitrogen8mm: enable UHS for sd card/ hs200 for eMMC by Troy Kisky 2019-11-04 13:46:02 -0800
  • 1d5958d1d6 mmc: fsl_esdhc_imx: create functions select_1p8v/select_3p3v by Troy Kisky 2019-11-04 13:44:00 -0800
  • 133bcb6cac mmc: fix UHS mode for ADATA cards by Troy Kisky 2019-11-04 13:42:44 -0800
  • defe842064 nitrogen8mm_som: check for testing pmic 301d by Troy Kisky 2019-10-31 14:49:36 -0700
  • a7d86856c5 mmc: add a driver callback for power-cycle by Yann Gautier 2019-09-19 17:56:12 +0200
  • ba3986192f dm: mmc: remove unused U_BOOT_DRIVER(mmc) by Andy Yan 2019-05-31 15:44:39 +0800
  • a60b0e7ef0 mmc: invalidate block cache after hwpart switched successfully by Weijie Gao 2019-08-27 15:32:19 +0800
  • 34d7be767c mmc: Parse no-1-8-v DT property by Peng Fan 2019-07-10 09:35:20 +0000
  • 08287e7a6d mmc: Parse HS400 Enhanced strobe DT properties by Peng Fan 2019-07-10 09:35:18 +0000
  • d6cd60e53b mmc: Read sd card detect properties from DT by T Karthik Reddy 2019-06-25 13:39:02 +0200
  • ed974960ab mmc: Parse HS400 DT properties by Marek Vasut 2018-06-13 06:50:16 +0200